PVcase Roof Mount 1.58

170 $

PVcase Roof Mount is AutoCAD software for commercial and industrial rooftop solar design. Automate 3D roof models, module layouts, shading analysis, stringing and cabling, then export to PVsyst—cut C&I rooftop design time by up to 80%…

Description


☀️ PVcase Roof Mount 1.58 — AutoCAD software for commercial rooftop solar

PVcase Roof Mount 1.58 is the AutoCAD plugin built for commercial and industrial (C&I) rooftop PV design. Model the building in 3D, generate module layouts, check near shading, size strings, route cables, print a single-line diagram, build a bill of materials, and export to PVsyst — all inside the same .dwg.

Version 1.58 (Help Center updates July–September 2026) is an engineer-facing release: cleaner, reusable SLD settings and a smarter Convert to PVcase workflow for sloped blocks and nested blocks. If your team still redraws client CAD, HelioScope, PV*SOL or parapet geometry by hand, this update is the reason to move every seat to 1.58.

🆕 What’s new in PVcase Roof Mount 1.58

📐 Customizable Single Line Diagram (SLD) settings

Permit sets live or die on a readable SLD. 1.58 lets you format the rooftop single-line diagram instead of fighting a fixed printout.

  • 🎛️ Control spacing and text so dense inverter/string drawings stay readable.
  • 🖱️ The diagram splits at each device — click and drag components into a cleaner page layout.
  • 🧩 The SLD is divided into virtual nodes. Update spacing and text size per node in one pass.
  • 💾 Import and export SLD settings so every designer in the office uses the same template.

Search intent this section targets: rooftop solar SLD software, AutoCAD PV single line diagram, C&I solar electrical drawing.

🧱 Convert to PVcase — sloped blocks and nested blocks

Real roofs are rarely clean 3D solids. 1.58 extends block conversion so more existing CAD becomes PVcase geometry instead of a redraw.

  • ⛰️ Sloped blocks: each point is adjusted by height. Use this for sloped objects, varying-height equipment, and parapets drawn as a single polyline. Very irregular shapes may still need a manual tidy-up.
  • 📦 Nested blocks: convert the space between an outer perimeter and interior blocks. Typical use: one outer parapet line plus separate inner roof outlines.
  • 🔄 Still supported alongside: HelioScope, PV*SOL (.pvprj), Airteam drone .dwg, generic .dwg (polymeshes, 3D polylines, solids, 2D modules/blocks), and K2 Base import.

⭐ Product highlights — the full Roof Mount workflow

🏢 1. Build the roof, not a guess

  • Draw a roof or pick it from the drawing.
  • Add ridges, slopes (including negative slopes), edge heights, parapets and offsets.
  • Place shading objects: HVAC, skylights (including flush height = 0), trees, nearby buildings.
  • Define safety paths, restriction zones and custom PV areas.
  • Run Roof builder health checks and Planarize roof when a surface is non-planar and modules would sit at mixed tilts.

🧱 2. Generate layouts that match the roof

  • Flat-south, east-west and flush-mount systems.
  • Separated east and west modules so tight leftover strips can still take a single row or column.
  • Fixed-tilt frames for C&I arrays and carport-style frames (rows × columns, module gaps, full or partial frames).
  • Align rows between PV areas, align flush systems to roof edges, copy generation settings from one PV area to another.
  • Compare options in Layout information before you lock a bid.

🌤️ 3. See the shade before you order modules

  • Yearly shading loss and in-plane irradiation per module.
  • Live shading projection for a chosen location, date and time.
  • Filter modules by loss or irradiance range and drop the ones that should never have been in the layout.
  • Custom North via AutoCAD NorthDirection so analysis matches the drawing north you already use.

⚡ 4. Electrical design without a second spreadsheet

  • Automatic string-size recommendation from location + module + inverter.
  • String assignment that can fill all MPPTs (equal distribution), not just the first inputs.
  • Custom stringing: daisy-chain, leapfrog, area patterns, opposite-side stringing on east-west layouts.
  • Cabling: automatic or manual tray routes, polarity rules, induction-loop control, optional crossing of safety paths.
  • Voltage-drop guidance and cable cross-section detail in the BOM / SLD workflow.

📊 5. Early yield, then PVsyst

  • In-app energy simulation powered by PVcase Yield ray-tracing irradiance (hourly values, annual roll-up).
  • Editable loss assumptions, hourly breakdown, CSV export for proposals.
  • Export to PVsyst by module or by group so the 3D model does not get rebuilt by hand.

🧾 6. Deliverables your other departments can use

  • Bill of materials with tilt-from-roof and tilt-from-ground fields.
  • Reusable component library (modules + inverters), including a pre-populated catalog.
  • Export / import of project settings and now SLD settings.
  • Audit tool: type PVCASERMAUDIT to flag duplicated or misplaced roofs, modules and strings after someone edited the file with the plugin closed.

💻 System requirements (official)

Meet these specs before you roll 1.58 out to the design team:

  • 🖥️ OS: Windows 10 64-bit or newer
  • 🧠 CPU: 3.0 GHz or faster
  • 🧮 RAM: 12 GB minimum (more is better on large C&I roofs)
  • 🎮 GPU: 4 GB, ≥106 GB/s bandwidth, DirectX 11
  • 🔧 .NET: Framework 4.8.1 for Roof Mount on AutoCAD < 2025; .NET 8.0 for AutoCAD 2025 / 2026
  • 📐 AutoCAD: optimal on AutoCAD 2019–2027, including 2025, 2026 and 2027. Also listed: AutoCAD Electrical, Mechanical, MEP and Civil 3D
  • 🚫 Not supported: virtual machines. PVcase Roof Mount will not run on a VM

✅ Close AutoCAD, run the installer from the PVcase License Manager, then launch with the Add-ins tab or the command PVCASEROOFMOUNT and paste your license key.

🐞 Bug fixes and reliability — what we can say accurately

The official 1.58 release notes list improvements only (SLD settings + Convert to PVcase block enhancement). They do not publish a separate 1.58 bug-fix bullet list.

What is public and useful for buyers:

  • 🛠️ 1.57 already shipped cleaner inverter labels (labels scale with inverter size and sit inside the symbol), enhanced AutoCAD 2025/2026 support, and under-the-hood reliability work.
  • 🔁 Updating to 1.58 from the License Manager or the in-AutoCAD prompt is the supported way to stack those stability fixes with the new SLD and conversion tools.
  • 🧹 Use PVCASERMAUDIT after file hand-offs — many “mystery” layout errors come from objects edited while the plugin was closed, not from a silent 1.58 regression.

Do not advertise invented 1.58 bug fixes. Google and technical buyers both punish that.

💡 Interesting facts

  • 🇱🇹 PVcase is a Lithuanian solar software company. Roof Mount launched in 2023 as the rooftop twin of PVcase Ground Mount.
  • 🏗️ The product stays inside AutoCAD on purpose: layout, shade, strings, SLD and permit geometry share one drawing.
  • 🚁 Airteam integration turns HD drone flights into a Roof Mount-ready .dwg. PVcase has said roof modeling time can drop dramatically when the survey is good (they cite figures up to ~90% on modeling, not on the whole project).
  • 🔗 K2 Base import lets mounting layouts land as PVcase objects instead of a second model.
  • 📈 Early energy simulation is a Yield-irradiance preview (c-Si, monofacial, one module type per run in the documented model) — still send the detailed case to PVsyst.
  • ⏱️ Public customer quotes around Roof Mount often mention 50–80% time savings on early layout work, and fewer back-and-forths between design and electrical.

🎯 Who should buy version 1.58

Yes: C&I EPCs, developers and CAD-fluent design offices that already own AutoCAD and bid multi-roof or obstacle-heavy commercial plants.

No: residential 6 kW quote desks that need a browser tool and have no AutoCAD seat. Roof Mount assumes a Windows workstation, a CAD license, and a roof worth engineering.

❓ FAQ

Is PVcase Roof Mount 1.58 a standalone program?
No. It is an AutoCAD plugin. You need a compatible Autodesk seat.

Can I convert old drawings?
Yes — .dwg objects, HelioScope (save DXF as DWG first), PV*SOL .pvprj files, Airteam outputs, and K2 Base projects, within the published object rules. 1.58 adds sloped-block and nested-block conversion.

Does it replace PVsyst?
No. It shortens the path into PVsyst and gives an early energy number. Bankable yield still belongs in PVsyst (or your chosen simulation stack).

How do I update?
License Manager download, or the update notice after you launch the plugin in AutoCAD. Shut down AutoCAD before you run the installer.

🚀 Get 1.58 on every design seat

Download PVcase Roof Mount 1.58 from the PVcase License Manager, activate with your key, and start the next C&I rooftop in AutoCAD instead of in a pile of disconnected tools. Request a demo if your team still measures design time in days instead of hours.


⭐⭐⭐⭐⭐

“Roof Mount 1.58 finally treats the SLD like a deliverable, not a dump. We convert messy client CAD (including sloped and nested parapet blocks), generate the layout, string it, and drop a readable single-line in the same .dwg. Shading and PVsyst export cut the usual redraw loop. It still needs AutoCAD and a Windows workstation — that is the deal. For commercial roofs, this is the plugin we keep on every seat.”

Design engineer, C&I EPC