ASMTower 2024 full cracked release

$ 160.00

Advanced Structural Modeling for Towers

ASMTower is an advanced software designed to rapidly analyze, design, and streamline the preparation of fabrication drawings for telecom towers. With comprehensive output capabilities based on both graphics and text, ASMTower offers a complete solution for tower design and analysis…

Category: Tags: , , , ,

Description

You can analysis and design different types of structures such as tapered/stepped monopoles, lattice towers, guyed masts, guyed poles and strut (bracketed) masts or poles. ASMTower calculates all required data from structure loading, linear/nonlinear analysis, buckling lengths, effective buckling length, member strength, bolt strength, anchor bolt strength, anchor development length, foundation analysis, foundation stability checks, interaction diagrams for RC columns, and prepared 3D model in Tekla to prepare shop drawings.

ASMTower allows for the assignment of various appurtenances to all types of structures, including steel ladders, step bolts, safety wires, feeders, panel antennas, microwave antennas, satellite dishes, solar panels, and generic appurtenances.

ASMTower supports the American code ANSI/TIA-222-I / H, which includes wind turbine structures design within its scope.

Top 5 Reasons Why ASMTower Is Your Best Choice

ASMTower offers solutions to a multitude of problems in the tower design industry, encompassing but not limited to:

  • checkIncorporates international design codes; ANSI/TIA-222-I, ANSI/TIA-222-H, ANSI/TIA-222-G, and the European code EN1993-3-1, allowing for the design of both the tower and its foundation in the same software.
  • checkCreates realistic 3D graphics, allowing for easy review of input.
  • checkFully automated processing includes loads, geometry, analysis and design.
  • checkdetailed reports and charts, allowing for customizable reporting styles.
  • checkTechnical support, rapid growth and continuous enhancements.

Our vision is to enhance productivity and quality in the tower design industry, which motivates us to consistently equip ASMTower with a variety of attractive features.

  • checkPowerful and responsive technical support.
  • checkProblem solvers and innovative thinkers.
  • checkFree addition of new features upon client request.
  • checkcontinuously conduct market research and emerge best practices
  • checkMaximize tower design efficiency with ASMTower.

Design your Tower in a Minute with ASMTower!!

ASMTower streamlines the design of self-supporting towers by using its amazing optimization feature and performs the design with minimal effort and time. It offers great flexibility to designers by allowing them to control the sections and final utilization ratio of main leg and bracing members.ASMTower offers two optimization methods:

The first method keeps the tower width unchanged while adjusting member sizes to achieve the desired utilization ratio. The second optimization method involves changing both the face width and member sizes to achieve the least weight, allowing for input of a range for the bottom and top face width and software then adjusts both the member sizes and face widths to achieve the desired result.
ASMTower provides detailed charts that describe the total weight of each iteration, as well as face width and deflection.
This level of detail and analysis is incredibly helpful for designers, allowing them to make informed decisions and adjustments as needed.
By automating and optimizing the tower design process while providing detailed analysis, ASMTower saves designers a significant amount of time and money, making it a highly valuable tool in the industry.

ASMTower performs the required structural analysis and designs according to the requirements of the design code used.

Following is the available design codes in the software:

  • ANSI/TIA-222-G
  • ANSI/TIA-222-H
  • ANSI/TIA-222-I
  • EN1993-3-1 accompanied by numerous national annexes.

Design examples and tutorial videos of telecommunication towers and monopoles according to ANSI-222-H and BS EN 1993-3-1

In these tutorial videos, you will learn how to use ASMTower to design different antenna supporting structures in the telecom industry according to :

  • ANSI/TIA-222-G
  • ANSI/TIA-222-H
  • ANSI/TIA-222-I
  • BS EN 1993-3-1

Example 1: Design of 30m monopole with 6 Antenna according to TIA-222-G or H

Learn how to design a 30m monopole with dual platform to carry 6 GSM antenna, 18 RRU, and 2 microwaves 1.2m. Telecom tower industry.

Example 2: How to design a 55 m Self-supporting tower TIA-222-G, H, Or I using ASMTower

In this example, you will learn how to verify the safety of an existing 55-meter tower according to TIA-222 code and the unsafe members will be retrofitted. Tower has been checked using ASMTower software to carry a climbing ladder, a feeding ladder, a transmission line cluster, gsm antennas, and microwave dishes. Anchor bolt and Mat foundation are also checked/ designed.

Part 1 : Tower Geometry

Part 3 : Panel antenna and MWs

Part 5 : Defining base connection

Part 2 : Ladder & Feeders

Part 4 : Wind load inputs, and connections

Part 6 : Mat foundation

Example 3: How to design a wall-mounted pole that carrying a GSM antenna

This video shows how you can model and design wall-mounted pole using ASMTower software. Telecom tower industry.

Example 4: Design a camouflaged cladding telecom towers and monopoles

This video shows how you can define camouflaged telecom structure and define the shielded zone under the cladding using ASMTower software.

ASMTower features

ASMTower was created by tower design experts at ASMTechnologies with the goal of simplifying the tower design process.
The software streamlines the design of both towers and their foundations and facilitates the creation of fabrication drawings.

ASMTower is capable of designing towers in accordance with both the American standards ANSI/TIA-222-G, H & I and the European standard EN1993-3-1 along with its national annexes.

ASMTower processes

  • User inputs structure data.
  • The software performs load calculation.
  • FE model is created and analyzed by the software.
  • Members and bolt connections are checked by the software.
  • Detailed report is generated by the software.

Analyzes and design

ASMTower utilizes both the American standards ANSI/TIA-222-I, ANSI/TIA-222-H and ANSI/TIA-222-G, as well as the European standard En1993-3-1, to analyze and design towers. The software automatically generates Dead load, Wind load, Ice load, and Guy load for the entire structure. ASMTower creates a 3D frame-truss model of the structure and calculates the straining actions on all members, as well as tower deformation.

3D Graphical presentation

ASMTower provides a complete 3D visualization of the structure, as well as its appurtenances, transmission lines, and ladders. This feature simplifies the structure review process and provides an accurate representation of the structure.

Guyed Pole Model in ASMTower
Latticed Tower Model in ASMTower
3Leg Mast With Struts Model in ASMTower
Pole Carrying Satellite Dish Model in ASMTower

Types of supported structures

ASMTower can design the following types of structures:

  • Three or four sided self-supporting towers
  • Three or four sided guyed towers
  • All types of tapered/stepped monopoles (round, 20-sided, 18-sided, 16-sided, 12-sided, and 8-sided)
  • Guyed poles
  • Structures with strut members (typically used in rooftop structures)
  • Non-penetrated base structures

Additionally, the software can handle structures that are a combination of the above types.

Related products